News
Your location:home>>cam and groove coupling>>news>>detail

Last:How many kinds does the common hydraulic cam and groove coupling, and what are the characteristics and use? Next:How to detect cleanliness of Hydraulic cam and groove coupling?

Cleaning process for cam and groove coupling:

Source： Notetime： 2013-12-10 10:22:43 click： 4173

　　The hydraulic element disintegration, technological plug and fit can not demolished, joint sealant removed.

　　All cleaning should be into the container, repeated washing parts cavity and oil channel with manual pressure oil gun, when cleaning up visual no dirt, and then cleaning gasoline cleaning once, then mixing solvent gasoline to remove 100ml, placed in glass test tube, observed in a bright place, such as visual observation not to any visible foreign matter and suspended impurities, at this time will be considered clean.

　　Whoever does not put people container ned large, must also be connected with a vessel, with a cup of oil clean.

　　Analysis of filter paper filter for cleaning parts after oil and oil flushing container type 202 medium speed quantitative.

　　Filter paper filtered into the weighing bottle, half cover status in 100 ℃ drying box drying 1H, remove the cover fit, should be put in the dryer cooling 0.5h then on the balance of total quality.

from：http://www.bauercoupling.com/newsd-nid-128.html