Cam and groove coupling manufacturers guide you how to control and prevent the hydraulic oil polluted

　　(a) when in processing, remove burrs from all parts, prevent the burrs being washed into the working oil in operation.

　　(b) to carefully clean the oil tank, pump casing, casing, pipe rotary component assembly, to prevent debris entering into the box.

　　(c) installation of pipeline to pipeline clean, as far as possible in the welding washed clean after the installation, prevent the oxidation of skin into the oil within the.

　　(d) this cam and groove coupling shall use cleaner pipe cleaning prior to commissioning, after cleaning the filter clean.

　　(E) yox first run after 500h, the replacement of the new oil, oil cleaning fluid cam and groove coupling cavity.

　　(f) at any time, check whether the failure of the air cleaner, and switched to a qualified product.

　　(g) timing cleaning device, oil pump suction mouth to remove dirt, prevent the flow reduction.

　　(H) the reasonable selection of filter rules, and reasonable arrangements for the position. The rated flow oil filter oil pump rated flow of general h greater than 3 ~ 5 times this can reduce the pressure loss and replacement of the filter element number, also can improve the oil filter function.

　　(I) temperature working oil should be controlled at 70 ℃, should be higher oil temperature will lead to oil ageing.

　　(J) the use of hydraulic transmission oil qualified. You to check the oil is qualified, not to impurities, moisture in.

The latest news:
Cam and groove coupling pump wheel and the shell flange leakage or pump wheel and the auxiliary chamber flange leakage
Cam and groove coupling shell oil leakage and The shaft end leakage of cam and groove coupling
Check whether the working machine of hydraulic cam and groove coupling is overloaded
Check the motor, reducer including working machine and flushing quantity of cam and groove coupling
The disadvantages of Hydraulic cam and groove coupling