News
Your location:home>>cam and groove coupling>>news>>detail

Last:Cleaning process for cam and groove coupling: Next:Why must we pay attention to the installation and debugging of hydraulic cam and groove coupling?

How to detect cleanliness of Hydraulic cam and groove coupling?

Source： Notetime： 2013-12-10 10:58:02 click： 3466

　　A detection and location of cleaning agent for cam and groove coupling:

　　Detection part is foreign body of all parts is the inner drive for all parts and control parts, hydraulic components and work in oil.

　　Cleaning agent for cam and groove coupling is for the 1.2um microporous membrane filtering after 100 ～ solvent oil No. 200.

　　B detection apparatus for cam and groove coupling:

　　Weighing accuracy of 1/10000 for balance.

　　Thermostatic drier and drier.

　　The weighing bottle two.

　　A container for the surface treated metal or enamelware.

　　Other: filter paper and manual pressure oil cavity of cup, funnel, silk cloth, tweezers, tube, 1.2um microporous membrane, type 202 medium speed quantitative.

　　C Detection of preparation and requirements for cam and groove coupling:

　　The testing site should be kept clean.

　　Seized the hydraulic element external need clean water.

　　The cleaning agent is filtered reserve.

　　Two preparation of filter paper were placed in two weighing bottle, half cover condition into the drying box, after drying at 100 ℃ after 1h, remove lid, put cool 0.5h in a dryer, and then the quality in the balance.

　　The container must be clean.

　

from：http://www.bauercoupling.com/newsd-nid-127.html