News
Your location:home>>king combination nipple>>news1>>detail

Last:do you know how to install the king combination nipple in a right way? Next:do you know the main explain about the cam of the cam and groove coupling?

how to avoid the king combination nipple disclosing?

Source： Notetime： 2014-06-20 09:28:55 click： 2557

　　Generally speaking, in the all kinds of the hydraulic systems, no matter the king combination nipple is metal materials or rubber hose coupler, all of them are very easy to have some leakage problems. Especially of the ferrule-type compression joint, if the outside pressure or the impulse force is too big, then most of the pipes would be very easy to have some damage, such as their cutting ferrules would be very easy to loosing or the king combination nipple tube end face has some transformation, then the nipples would be very easy to have some leakage problems.

　　The solve method is that you should check that if the cutting ferrule has some out-of-round or not, check if there is some defect happened on the cutting edge, you also need to check that if the tube end is good or the card sleeve nut has a good compaction degree, you also need to eliminate the outside force of the pipes at the same time,etc. If you had found any problems which happened on the king combination nipple , you should adjust it on time. If you do not know how to solve those problems, you can ask help for some professional workmen.

　　Most of the king combination nipple has a too big flaring, or if their quality can not meet the requirement of the installation standard, then they need to be tear down for some times, this step would causing the flaring deformation or have some cracks, then the king combination nipple would have the leakage problems, so you need to cutting down the leading end then restart the flaring process.
 

from：http://www.bauercoupling.com/newsd-nid-243.html